土木在线论坛 \ 建筑结构 \ 钢结构工程 \ 关于《抗规》8.2.8条的讨论

关于《抗规》8.2.8条的讨论

发布于:2022-07-13 15:02:13 来自:建筑结构/钢结构工程 2 35 [复制转发]

抗震设防6度,高度50米以下的钢框架结构。是否要满足《抗规》8.2.8条的计算要求?

  • tshyshy
    tshyshy 沙发

    事实上纯粹的钢框架很少,很多应该属于钢-砼组合结构,因此按抗震设计为好。

    2022-07-15 10:48:15

    回复 举报
    赞同0
  • 王天方
    王天方 板凳

    觉得可以不用抗震?  实际当中我还是按4级做的。很多地方不认可不抗震的。我做轻型门式刚架都要求我定义抗震等级的。

    2022-07-14 10:49:14

    回复 举报
    赞同0
评论帖子
评论即可得
+1经验值
+10土木币

请先 登录,再参与讨论!

相关推荐
这个家伙什么也没有留下。。。

钢结构工程

返回版块

45.93 万条内容 · 770 人订阅

猜你喜欢

阅读下一篇

小体量,办公设计:穿孔板外立面

由Belzberg建筑事务所设计的Profiles,调查了墨西哥城一个街区中段物业的设计潜力。这座8层高、24,000 SF的办公大楼与Cuauhtémoc社区内一条繁忙的单行道上的一幢历史悠久的三层楼房相邻。墨西哥城的密度特点是,整个城市的建筑高度不一,彼此相邻,绝大多数街区中段建筑的设计元素都集中在面向街道的立面上。 Profiles, designed by Belzberg Architects, investigate the design potential of a mid-block property in Mexico City. The eight-story, 24,000 SF office building is located adjacent to a historic three-story building on a busy one-way street in the Cuauhtémoc neighborhood. Mexico City’s density is characterized by buildings of varying heights adjacent to one another throughout the city with the vast majority of mid-block buildings focusing design elements on the street-facing fa?ade.

请选择删除原因

回帖成功

经验值 +10